MV Customer Premise Equipment for High Speed Lines

High Speed Line Customer Premise Equipment

For leased line and Frame Relay installations, MV service is delivered to your ethernet via a router and CSU/DSU at your site. BOTH a router and a CSU/DSU are required, or the equivalent combination. You can provide your own router and CSU/DSU if you assume responsibility for its configuration and maintenance. You can purchase one of the following from MV, or it can be supplied and maintained by MV for a monthly fee. The Livingston and Engage routers interface to your LAN via 10BaseT ethernet.
Speed Description Purchase MV Provides
56Kbps Livingston OR-HS Router
(Requires external CSU/DSU, extra) 		$ 750 $ 63/mo
The Livingston OR-HS router supports link speeds up to T1 (1.5Mb/sec). If you upgrade to a speed above 56Kb, you will need to replace the CSU/DSU but you can continue to use this router.
56kbps Engage IP*Express XL-56/64
(with built-in CSU/DSU) 		$ 750 $ 63/mo
The Engage IP*Express*56 is a combination CSU/DSU and router unit, all-in-one. It can be upgraded to a T1 unit for a $400 upgrade cost.
T1 Engage IP*Express XL-T1
(with built-in CSU/DSU) 		$ 885 $ 74/mo
The Engage IP*Express*T1 is a combination CSU/DSU and router unit, all-in-one. It supports T1 service using data rates from 64Kbps to full T1 speed.
56Kbps BAT 56Kbps CSU/DSU
(for use with 56Kbps router) 		$ 250 $ 21/mo
T1 BAT EZ-FT1 CSU/DSU
(for use with T1 router) 		$ 400 $ 34/mo
The BAT EZ-FT1 is a low-cost CSU/DSU that supports T1 service using data rates from 64Kbps to full T1 speed.

More information about Livingston and Engage products is available. MV has no affiliation with either firm other than being customers.

Rates and services Access Policies Register Customer Pages User Information Back to top
About MV Our Staff Feedback Contacting us
Copyright © 1998 thru 2008 MV Communications, Inc.