Job-0001 - Manager Product Development

Digital Design, Management, Storage Systems, SAN Applications, RTL, SOC, ASIC, fibre channel

RTL Design, SOC Design

Good Communication

System and Protocol knowledge of fibre channel storage systems. Knowledge of SAS and/or SATA based architectures is highly desireable. More than 8 years in defining, developing and taking to production .18u and .13u ic's including high speed digital and analog. 1 or more years developing IC's for storage system or SAN applications. 2 or more years of SOC development experience with embedded MIPS or similar processor. 5 or more years managing small to medium sized directly reporting teams.

Primary responsibilities:

Manage and develop team of 5-8 Engineers
Manage customer engineering interface
Technically support sales, marketing and apps engineers
Project manager and technically manager multiple chip developments
Define and architect chip level products including associated software

Job-0002 - Sr. DFT Engineer

DFT, Mentor, DFTadvisor

This is a Sr. level position for a DFT Engineer. Main responsibilities are to set the direction for the group as well as be a hands-on contributor. Must understand the manufacturing defects and understand how to fix them. Knowledge of deep submicron issues working within .13 micron technologies.

Job-0006 - Senior Analog and Mixed-Signal Design Engineer

Design analog and mixed-signal integrated circuits for system and power management products, including:

· Linear Regulators
· Switching Regulators (DC/DC Power Converters)
· Hot-Swap Controllers (Current Limiters, Circuit Breakers, etc.)
· Power-Over-Ethernet / Power-Over-LAN Products
· Microprocessor Supervisory Products

We design these products in our state-of-the-art Bipolar/CMOS/DMOS processes.

Working side-by-side with the highest-caliber analog circuit designers, you will have the opportunity to see your creative skill result in commercially successful products.


Requirements:

BSEE and 5+ years relevant industry experience, or
MSEE / Ph.D. and 3+ years of relevant industry experience.

The ideal candidate will have direct experience in at least one of the product areas listed above.

The successful applicant will have the ability to design fundamental analog building blocks (references, regulators, amplifiers, comparators, oscillators), and to make them work together in a modestly complex system where understanding of the application is important.

Familiarity with both bipolar and CMOS design is preferable, and DMOS design experience would be valuable.

High voltage design experience (i.e. telecom, up to 80V) and a good understanding of process technology and semiconductor physics are also very valuable.